Sep 16, 2026Services Overview
Pump Lifting Chain Guide
Pump lifting chain handles the pump assembly in water wells and drainage systems. What it needs to resist, how it is specified, and what to confirm before ordering.
Pump Chains for Lifting Applications
In water supply, irrigation, offshore, and industrial pump systems, lifting chains are used to raise and lower submersible pumps for installation, maintenance, and inspection. These chains must perform reliably under demanding conditions — and at Boyuan Metal, we supply high-strength welded chains designed specifically for pump lifting.
Understanding the Load
A pump lifting chain is not just holding static weight. The working load must account for:
- Dead weight — the pump itself plus the full length of chain
- Dynamic shock loads — sudden pressure surges when the pump is lifted through water, particularly in subsea or deep well applications
This combination of static and dynamic forces means the chain requires a higher safety marginthan standard lifting applications. Every component must be rated accordingly.
Material Selection
We offer two material options to suit different environments:
Material | Application |
|---|---|
High-strength stainless steel (304 / 316) | Corrosive environments, seawater, potable water systems |
High-strength hot-dip galvanized carbon steel | Deep wells, industrial pumps, heavy-duty applications where maximum strength and corrosion protection are required |
Both options are manufactured as welded short-link chains with controlled link dimensions and consistent weld quality, ensuring smooth operation over pump guides and sheaves.
Complete with Matching Shackles
To simplify procurement, we supply matching shackles in the same material grade and load rating as the chain. This ensures:
- Consistent working load limits across the assembly
- No material mismatch or galvanic corrosion risk
- Single-source documentation and traceability
What We Deliver
Every order comes with mill test certificates (MTCs) confirming material grade, mechanical properties, and proof load test results. We manufacture to international standards and can supply chains to your exact length, diameter, and grade requirements.
Contact Us
If you are sourcing pump lifting chains, please send us:
- Required working load or minimum breaking force
- Chain diameter and length
- Material preference (stainless steel or hot-dip galvanized)
- Operating environment (fresh water, seawater, deep well, etc.)
Our team will prepare a quotation within 24 hours.
Boyuan Metal — Reliable pump lifting chains, built for the load.
Frequently Asked Questions
What is a pump lifting chain used for?
It is used to suspend, lift and hold submersible pumps and pump equipment in wells, tanks and pump stations, where the chain carries the pump's weight and stays submerged or damp for long periods.
Which material should I choose for a pump chain?
Stainless steel is the usual choice for pump lifting, because the chain sits in water or process liquid and must not rust. For pump duty we supply our high tensile stainless steel G50 chain, made for exactly this application.
How is the chain matched to the pump?
Match the chain size and strength to the pump weight and the lifting arrangement, as covered in the load section above. Tell us the pump weight and the well or tank depth and we will confirm the chain.